Magellan 330 Series User Manual

54 Magellan MAP 330 GPS Receiver
Reference
Reference
Selecting NAV Units — Allows you to select the units of measure that will
be used when displaying navigational data. Options are: Miles/MPH,
NM/Knots or KM/KPH.
From
Any
Screen
MENU
ENTER
Highlight
Setup
ENTER
Highlight
Nav Units
Select
Nav Units
ENTER
Default: Miles/MPH
Selecting the North Reference — Allows the selection of whether the MAP
330 uses True North or Magnetic North as its North reference.
From
Any
Screen
MENU
ENTER
Highlight
Setup
ENTER
Highlight
North Reference
Select
North
Reference
ENTER
Default: Magnetic
Setting the Backlight Timer — Allows you to set the time interval that
will be used to turn off the display backlight when not in use. Times
available are: 30 seconds, 1 Minute, 2 Minutes, 4 Minutes, 10 Minutes
or Timer Off.
From
Any
Screen
MENU
ENTER
Highlight
Setup
ENTER
Highlight
Light Timer
Select
Timer
Duration
ENTER
Default: 4 Minutes

Magellan 330 Series Specifications

General

Brand	Magellan
Model	330 Series
Category	GPS
Language	English