Stream Name, follow the on-screen instructions to log in and select a
server.
2. Click Log In. Follow the on-screen instructions to open YouTube, enter the
code displayed on your device, and log in.
Your avatar will be displayed after a successful logging-in.
3. Specify a Name for your streaming session, which can be 1 to 30
characters.
4. Choose main or sub stream for streaming, parameters of which can be set
in Encode tab.
5. Choose an audio stream (1 to 4) for streaming, and the default value is
Audio stream 1. Audio encoding parameters can be set in Encode >
AUDIO STREAM.
6. Server is automatically filled in after successful login, and it is not
recommended to change it.
7. Choose the prime network for streaming.
By default, the network connection priority is: Mobile Broadband >
Ethernet > Wi-Fi.
The device scans for the available network according to the connection
priority and connect to it for streaming. If the current network is
disconnected, the unit automatically re-scans according to the priority.
Plug a USB modem into your encoder while using mobile network to
stream.
8. Tap Publish to and select a channel or event for your session.
Choose Add a new stream and enter title, description and privacy. Then a
new live event would be added to your logging-in account automatically.
And you can stream to YouTube using streamer without clicking on go
To Next Page
Loading...
