Page 37
4. SERVICING INSTRUCTIONS
4.1. General Requirements
All repairs and servicing must be carried out by a qualified registered gas installer (e.g.
member of CORGI in GB) in accordance with the current Gas Safety (Installation and Use)
Regulations and these instructions.
Before any servicing is carried out ensure that the gas and electrical supply (where applicable)
have been isolated.
After any servicing or replacement of any parts, the appliance should be re-commissioned.
4.2. Servicing Instructions
As part of the appliance service, the flue and
fireplace opening should be checked for
soundness and any debris removed.
Refer to the section:
2.9.1 - Cleaning the Fire-Bed and the
Imitation Coals/Pebbles on Page
18
then section:
2.9.2 - Cleaning the Pilot on Page 19.
On completion of the servicing, a spillage
test must be carried out.