Magner 155 - Daily Maintenance; Maintenance Method Overview

Maintenance Method
Daily Maintenance
No.
No.No.
No. Check Point
Check PointCheck Point
Check Point Maintenance
MaintenanceMaintenance
Maintenance Method
MethodMethod
Method Cycle
CycleCycle
Cycle Remarks
RemarksRemarks
Remarks
1 Hopper Sensor and Rollers Cleaning Daily 48 Page
2 Detection sensors Cleaning Daily 49 Page
3 Stacker sensor and reject
stacker sensor
Cleaning Daily 50 Page
4 Diverter sensor Cleaning Daily 51 Page
5 Dust pocket Clean and empty the dust
pocket.
2 month 51 Page
6 Pick-UP Roller Check strain 6 month Replacement by
trained person
7 CABLE and CONNECTOR Check exfoliation and
disconnect
6 month Replacement by
trained person
8 PATH SENSORS Using Service-Sensor Menu 6 month Replacement by
trained person
9 Motors Using Service-Diagnostic
Menu
6 month Replacement by
trained person
10 TIMING BELT Check abnormal noise and
belt deviation
6 month Replacement by
trained person
Maintenance
-
--
-47
4747
47-
--
-