Magner 155 - Error Code Reference

Error Code List
Code
Code Code
Code
No.
No.No.
No.
Reason
ReasonReason
Reason Releasing Method
Releasing MethodReleasing Method
Releasing Method
01~05 Communication error
1. Turn the power switch off and on.
2. If the Error continues, please Contact to
service Center.
10 Initial Inlet Sensor Fail
1. Open the upper cover and lower part.
2. Check and Cleaning the sensors.
11 Initial Check R Sensors Fail
1. Check and Cleaning the check sensors.
12 Initial Check L Sensors Fail
13 Initial Diverter Sensor Fail
1. Check and Cleaning the diverter and diverter
end sensors.
15
Initial Diverter End Sensor
Fail
16 Initial Stack Sensor Fail
1. Remove the banknotes from the stacker.
2. Check the stack sensor.
17 Initial Reject Sensor Fail
1. Remove the banknotes from the reject stacker.
2. Check the reject sensor.
18 Initial Reject Full Sensor Fail
20 Miscount
1. Count mismatch. Please count again.
21 Guide Open
1. Close the upper cover.
22 Feed Motor Error
1. Check the feed Motor.
23 Pickup Motor Error
1. Check the pickup Motor.
24 Feed Check Error
1. Turn the power switch off and on.
2. If the Error continues, please Contact to
service Center.
25 Diverter Act Error
1. Count mismatch. Please count again.
2A Pickup Fail
1. Clean the pickup sensor and rubber.
Error & Guide
-
--
-54
5454
54-
--
-