Magner 155 - Error Code Reference (Continuation)

Code
Code Code
Code
No.
No.No.
No.
Reason
ReasonReason
Reason Releasing Method
Releasing MethodReleasing Method
Releasing Method
31 Pickup JAM
1. Open the upper cover, remove the notes.
2. Press auto clear button.
32 Path JAM
1. Open the upper cover and lower part, remove
the notes.
2. Press auto clear button.
33 Diverter Out JAM
41 Check R Sensor Fail
1. Check and Cleaning the check sensors.
42 Check L Sensor Fail
43 Diverter Sensor Fail
1. Check the lower cover is closing
2. Check diverter sensor.
44 Diverter Check Sensor Fail
1. Check and Cleaning the Diverter sensors.
45 Diverter End Sensor Fail
46 Stack Sensor Fail
1. Remove the banknotes from the stacker.
47 Reject Sensor Fail
1. Remove the banknotes from the reject stacker.
48 Reject Full Sensor Fail
50 Boot State
1. Turn the power switch off and on.
2. If the Error continues, please Contact to
service Center.
51~53,
56~58
Program upgrade error
1. Program upgrade retry.
2. If the Error continues, please Contact to
service Center.
61~62 Hardware problems
1. Turn the power switch off and on.
2. If the Error continues, please Contact to
service Center.
65~66 Calibration Error
1. Calibration retry.
2. If the Error continues, please Contact to
service Center.
Error & Guide
-
--
-55
5555
55-
--
-