Magnetek FLEX-6EX - Receiver Status Light Indication; Receiver SQ Light Indication; Receiver Power Light Indication; Receiver COM Light Indication

Flex 6EX System Instruction Manual
March 2016
Page 36 of 38
7.2.2 Receiver STATUS Light Indication
Type Display Type Indication
1
Fast green blinks Decoding in process
2
Slow green blinks Decoding on standby
3
Two red blinks Receiver MAIN jammed or defective
4
Fast red blinks Incorrect transmitter serial number/ID code
5
Constant red
Receiver under-voltage, LV output relay
activated
6
No light displayed Decoding microprocessor is defective
7.2.3 Receiver SQ Light Indication
Type Display Type
(Red) Indication
1
Fast blinks Transmission received
2
Completely off No transmission
3
Blinks intermittently Other radio interference
7.2.4 Receiver POWER Light Indication
Type Display Type
(Red) Indication
1
On Power to receiver
2
Off No power to receiver
7.2.5 Receiver COM Light Indication
Type Display Type
(Red) Indication
1
On Power to relay board
2
Off No power to relay board