RATE: The derivative action time constant.
RCAS_IN: Target setpoint and status that is provided by a
supervisory host.
RCAS_OUT: Block setpoint and status that is provided to a
supervisory host.
RESET: The integral action time constant.
ROUT_IN: Block output that is provided by a supervisory
host.
ROUT_OUT: Block output that is provided to a superviso-
ry host.
SHED_OPT: Defines action to be taken on remote control
device timeout.
SP: The target block setpoint value.
SP_HI_LIM: The highest SP value allowed.
SP_LO_LIM: The lowest SP value allowed.
SP_RATE_DN: Ramp rate for downward SP changes.
SP_RATE_UP: Ramp rate for upward SP changes.
STATUS_OPTS: Allows one to select options for status
handling and processing.
STRATEGY: Can be used to identify grouping of blocks.
ST_REV: The revision level of the static data associated
with the function block.
TAG_DESC: The user description of the intended applica-
tion of the block.
TRK_IN_D: Discrete input that initiates external tracking.
TRK_SCALE: The high and low scale values associated
with TRK_VAL.
TRK_VAL: The value applied to OUT in LO mode.
UPDATE_EVT: This alert is generated by any changes to
the static data.
34
57-640 Eclipse Guided Wave Radar Transmitter - FOUNDATION fieldbus
™
To Next Page
Loading...
