MAHA MLT 3000 - Page 39

39
BA380701-en
Set variables using System / Settings / Sec-
tion, Lanes, External Devices.
 Variable 1: 100
(standalone device only)
 Variable 25: 1
 Variable 26: COM port
Reboot EUROSYSTEM.
Test devices are connected automatically.
After the measurement has been started,
all measured values are transferred to
EUROSYSTEM.
The connection to the MLT 3000 is re-
tained until EUROSYSTEM is quit.
Select menu item <Display measurement
values>.
Select menu item <Light tester>.