BA380701-en
An overview of the measured values ap-
pears.
Select the desired measurement.
In this example: second level with dynamic
high-beam and motorway light.
The selected measurement data is dis-
played in detail.
Graphic representation of headlight ad-
justment in EUROSYSTEM:
Use the camera button on the MLT 3000
display to switch over to headlight ad-
justment. EUROSYSTEM shows the coordi-
nates, the measured values and the head-
light image in real time.
The headlight pattern graphics can be up-
dated manually using the <F6> button.
The image transmission can be completely
disabled via soft DIP.
To Next Page
Loading...
