Mahindra 10 Series - Hydraulic Control Lever and Knob Adjustments; Draft Control Lever Usage; Lowering Speed Control Knob

Warning
After finishing the work, always lower the implement to the ground and switch off
the engine, Set the parking brake to avoid injuries and accidents .
► DRAFT CONTROL LEVER
Soil engaging implements can be set for precision
work by using draft control.
By mounting the lever forward. the depth increases &
by moving the lever backwards the depth increases.
► LOWERING SPEED CONTROL KNOB FOR THE 3 POINT HITCH
This knob controls the downward speed of the
Hydraulic’s three point linkage and is positioned at the
front of the driver’s seat.
To slow the downward speed- Turn the knob clockwise.
To increase the downward speed, turn the knob counterclockwise.
To lock the knob, turn clockwise.
Do not over tighten the knob.
Alwa
y
s set the knob to lock when
46
y
1.Traveling on the road
2.Replacing tires or blades on an implement.
3.Making adjustments to an implement. Sudden dropping of an implement due to
hydraulic problems can cause serious injury or death.
Caution