1. Checking the air conditioning system.
①Environment friendly refrigerant : R134a 0.7∼0.85Kg.
The presence of air and water in the system could jeopardize its efficiency.
-The air is uselessly compressed by the compressor and no cooling effect is produced.
Moisture has a tendency rise to obstructions which prevent the cooling efficiency
-
.
② Check belt tension ; when finger pressure is applied to the mid-point between both pulleys.
③ Condenser fins must always be duly cleaned, using water or an air set.
2. Checking the air conditioning system charge
(1) Check the refrigerant charge.
A.Run the engine at 1500rp
B. Set the air conditioning system on the coldest setting for 5 minutes.
C. Check the sight glass clear or cloudy.
If the air-con. is operated without a charged.
Caution
the lubrication in the compressor can cause the damage.
(1) Check the refrigerant with the receive drier sight glass
Bubbles or foam visible Trouble shoot
● Bubbles flow and
refrigerant gas
disappears like a fog
flows
Replenish
● Nothing different temperature
between H.L pipe
● High pressure of the pressure
gauge needle indicates low pressure
Abnormal
● Replenish the refrigerant
Same bubbles appea
occasionally
(1~2 sec. gap)
High pressure pipe is hot and low
pressure pipe is a little cool.
● H.L pressure of the pressure gauge
needle indicates low pressure.
Abnormal
90