Mahindra 2810 - Page 205

Service instructions
and remarks
Usable limitsStandard value
for reassembly
Nominal
dimensions
Part names and
inspection items
2. MAIN CLUTCH (CHAPTER 4)
Adjust with the clutch
rod
(turn buckle)
20 ～ 30 ㎜Free play of
CLUTCH PEDAL
97 ㎜Total stroke
13 No.of
teeth
Spline
hub
0.05 ㎜ or lessClutch cover
(Dual type)
Pressure plate
flatness
Should be measured on
the hub.
0.3 ㎜
Play between hub
spline and input
gear in rotational
direction
Ø21.7 ㎜
Small
diameter
Ø25.0 ㎜
Large
diameter
1.0 ㎜0.7 ㎜
Distance from
release lever
35.0 ±1.0 ㎜ (IP TYPE)Distance from
flywheel surface to
release lever top
CLUTCH DISC
ASSEMBLY
(Dry single plate)
Facing wear
Clearance between
safety switch and
push arm
12 ±1 ㎜
Rivet head depression
should maintained at
more than 0.2 ㎜
6.5 ㎜8.4 ±0.3㎜
11-2