Mahindra 2810 - Section 2. Specifications; Wheel Drive System; PTO Drive System

SECTION 2. SPECIFICATIONS
1. WHEEL DRIVE SYSTEM
Column shift
Linear shiftOperation
methods
1 /4.363Drive pinion-Ring gear
0.2619 (11/42)
0.8276 (24/29)
2.6429 (37/14)
Low
Mid
High
Speed range shift
0.4250 (17/40)
0.5833 (21/36)
0.7500 (24/32)
1.0357 (29/28)
1
st
2
nd
3rd
4th
Main speed shift
Side shift (RH)Speed range shift
32 ℓT290/T300/T330/2810NEW Transmission
case
Oil capacity
0.4524 (19/42)
0.4398 (19/30 ×25/36)
forward
reverse
Speed shift rangeReduction
ratios.
Engine rated rpm: 2800 RPMSpeed shift range
Side shift (RH)Main speed shift
THF 500Oil
2) PTO DRIVE SYSTEM
Wet,multi-disc,hydraulic-operated clutch
THF500 (In common with transmission oil)Used oil
Number of clutch plates
Type
CW viewed from the rearRotation direction
Φ35 mm, 6 straight splinesPTO shaft size
540 @ Engine 2,541rpmPTO shaft speed
12/37,15/34,18/30,21/27Reduction ratio
Speed shift range
7
PTO clutch
4
Rear PTO
Multiple Wet Disk CLUTCH
INDEPENDANTTYPE
T290/T300/T330/2810NEWMODEL
5-4