Mahindra 2810 - Filter

6. FILTER
Fig. 9-30 Filter
1)GENERAL DESCRIPTION
The tractor is equipped with two oil filters:
suction filter(1) and line filter(4),for better
filtration.
2)SPECIFICATIONS
-Suction filter
4) REPLACEMENT
Check the O-rings for damage or deformation
and replace defective ones.When installing the
filters,be sure to install the O-rings properly
with grease applied.
790Filtration area(㎠)
-30 ～130℃Working oil temperature (℃)
150 meshFiltration density (mesh)
45Rated flow rate(ℓ/min.)
DONAX TD or
RPM THF 500
Applicable oil
3) Line filter
-30 ～130℃Working oil temperature (℃)
80 meshFiltration density (mesh)
32Rated flow rate(ℓ/min.)
DONAX TD or
RPM THF 500
Applicable oil
9-14
Fig. 9-31