25
48 Valve Springs can be removed from the
Cylinder head by removing the lock.
Remove the top retainer, Spring, Bottom
retainer and thrust washer.
49 Remove the cylinder head block by
removing the dowel by pulling it.
Dismantling procedure of the Piston
assembly.
50 Remove the circlip of piston pin.
51 Hammer the piston pin with a mallet and
remove the piston pin & piston.
Dismantling procedure of crankcase front
cover-
52 Remove the nine bolts of the front engine
cover.
53 Remove the engine front cover
54 Remove the gasket front cover.
55 Remove the spin on oil filter.
56 Remove the six bolts of the clutch cover
assembly (13mm).
Piston
Piston
Pin
Mounting
Bolt
Engine
Front Cover
Clutch
Assembly
Cylinder
Block
Engine
To Next Page
Loading...
