Operators and specialist staff
Operators
Operators are the persons who are responsible for preparing, operating and cleaning
the machine, and for troubleshooting in the sewing zone.
Operators have a duty to observe the following items:
The safety notes specified in the operating instructions must be observed during all
work!
No method of working must be used that affects the safety of the machine!
Close-fitting clothing must be worn. No jewellery, such as chains, necklaces and
rings, must be worn!
It must be ensured that only authorised persons stay in the danger zone of the
machine!
Any changes occurring on the machine that affect safety must be notified to the
Operator immediately!
Specialist staff
Specialist staff means persons with electrical/electronic and/or mechanical technical
training. They are responsible for lubrication, maintenance, repair and adjustment of
the machine.
Specialist staff have a duty to observe the following items:
The safety notes specified in the operating instructions must be observed during all
work!
Before starting work and before any adjustment or repair work, the main switch must
be switched off and locked off to prevent reclosure!
Work on electrical equipment must only be carried out by specialist staff who are
qualified for this type of work.
No work must be carried out on live parts and devices, except as specified in
regulations EN 50110!
Protective covers must be refitted after repair and maintenance work!
To Next Page
Loading...