Maipu S2000-8/16 10/100Mbps Ethernet Switch - User Manual

2011 Maipu Communication Technology Co., Ltd, All Rights Reserved
MyPower S2000 Series Backward Power Feeding
Switch User Manual

Summary

Chapter 1 Accessing Device

1.1 Accessing Mode

1.3 Log in

Instructions on how to log in to the device using its IP address and credentials.

Chapter 2 Management

2.1 Password Configuration

Guide to changing the username and password for device authentication.

2.2 System Configuration

Chapter 3 Port Configuration

3.1 Port Configuration

Configure port settings like Auto-N-Way, Speed, Duplex, and 802.3x.

3.3 Bandwidth Control

Chapter 4 VLAN Configuration

4.1 VLAN Mode

Select between Port Based VLAN and Tag Base VLAN modes.

4.2 VLAN Member

Configure which ports belong to specific VLANs (Port Based and Tag Based).

Chapter 5 Packet Accounting

Chapter 6 QoS Configuration

6.1 Priority Mode

Configure Quality of Service priority modes: FIFO, PQ, and WRR.

6.2 Priority Configuration Based on TCP;UDP and IP TOS;DS

Chapter 7 Packet Security Filtering

7.1 MAC Address Binding

Bind MAC addresses to ports to control packet transmission.

7.2 TCP;UDP Filtration

Chapter 8 Spanning Tree

8.1 STP Bridge

Chapter 9 Truck

Chapter 10 DHCP Relay Agent

10.1 DHCP Relay Agent

Chapter 11 Backup and Recovery Configuration

11.1 Configure Backup and Recovery

Download configuration for backup and upload configuration for recovery.

Chapter 14 Restore to Default Hardware Configuration

14.1 Restore to Default Hardware Configuration

Guide to restoring the switch to default hardware configuration.

Appendix 1 Diagnosis of Common Faults

Common Faults and Solutions

Maipu S2000-8/16 10/100Mbps Ethernet Switch Specifications

General

Switching Capacity	3.2Gbps
Forwarding Rate	2.38Mpps
Operating Temperature	0°C to 40°C
Operating Humidity	10% to 90% non-condensing
Storage Humidity	5% to 95% non-condensing
Ports	8/16 10/100Mbps Ethernet ports