EN
10
Instructions Guide
Connecting to the Mains Supply
Ensure that the power supply voltage is within the range of
100V-240V.
Any other voltage may cause damage to the unit.
Unwind the mains cable to its full length. Connect the mains plug to a
mains socket. Ensure that the mains plug is fully inserted into the
mains socket.
The mains plug/appliance coupler is used as the disconnect device.
The disconnect device must remain readily operable.
Connect the Adapter to the unit and AC socket (Ref.11).
Ensure all audio connections of the unit are connected before
connecting to the mains power socket.
Unplug the power cord from the outlet when the unit is not in
use for an extended period of time.
To Next Page
Loading...
