EN
11
Instructions Guide
Connecting the Subwoofer with the Soundbar
Follow the below instructions to connect the wired subwoofer to the
soundbar.
1. Plug the soundbar into mains sockets. Press POWER button on the
unit or “ ”button(power logo) on the remote control to switch on
the unit.
2. User the RCA audio cable from the subwoofer to connect to the
SW.OUT jack (subwooferout) on the soundbar.
3. When audio is played through any source, the bar will automatically
use the connected subwoofer.
To Next Page
Loading...
