EN
12
Instructions Guide
Bluetooth Operation
Pairing a Bluetooth Device for the First time
Select and press the mode directly on the remote control (Ref.13)
or on the soundbar (Ref.4) until Bluetooth mode is
selected,indicated by a flashing blue light.
Using the native controls on your Bluetooth device, select the
“Majority Bowfell” when prompted to choose a Bluetooth device.
If your device requests a password, enter the default “0000”. If you
encounter issues at this stage, please refer to the user manual for
instructions on pairing and connecting Bluetooth devices.
When successfully paired and connected, a beep will issue from the
unit and the pairing indicator will display a solid blue light. After
initial pairing, the unit will stay paired unless unpaired manually by
the user or until the device is reset.
To unpair, hold down the PAIR button for 3 seconds. You can now
pair the device with another Bluetooth Device.
If your device should become unpaired or you find it is unable to
connect, repeat the steps above.
To Next Page
Loading...
