EN
8
Instructions Guide
Using the RCA Input
You will need : an audio source with an RCA Output and an RCA
cable (included).
Connect the RCA cable to the RCA output on the audio source and to
the AUX on the speaker BAR (Ref.7).
Press the POWER/MODE button on the remote control or the main
unit (Ref.4/Ref.13) to select AUX mode. The mode indicator LED will
turn GREEN.
Using the native controls on your connected device, make sure the
audio settings are set to Analog stereo output/RCA/Audio output.
To Next Page
Loading...
