MAJORITY Fitzwilliam 3 Instruction Manual

GB-14
DAB Operation
Press MODE button on unit or remote control to access Mode Menu. Turn the SCROLL/SELECT dial on unit
or press
S / 8
buttons on remote control to select DAB Radio Mode, then press SCROLL/SELECT dial on
unit or SELECT button on remote control to confirm. The unit will enter DAB Mode and perform the auto
scan function. During the scan the display will show “ S c anning … ” together with a slide bar that indicates
the progress of the scan and the amount of stations that have been found so far. Once the scan has finished,
the unit will select the first alphanumerically found station.
To explore the found stations, press ▶" ^/▼ □ buttons to select and press the SELECT button to confirm.
Station List
1.
During DAB Mode, press the MENU button to access DAB menu.
2.
Press ▶" ^/▼ □ buttons to select Station list and then press the SELECT button to confirm.
3.
A list of DAB stations will show on the display.
Auto Scan
-
Press the SCAN/▶" button on unit or SCAN button on remote control to activate auto scan.
Alternatively,
- Press the MENU button, and then press ▶" ^ / ▼ □ buttons to select S can . Press the SELECT button to
confirm.
1. The display will show “ S c
anning
… ” and a progress slide bar.
2.
All the stations that have been found will be stored automatically. To explore and listen to the found
stations, press ▶" ^/▼ □ buttons to select and the press the SELECT button to confirm.
Manual Tuning
As well as the auto-tune function, you can manually tune the receiver. This can help you when aligning
your aerial or when adding stations that were missed while auto-tuning.
1.
Press MENU button to display the menu.
2.
Press ▶" ^/▼ □ buttons to select Manual Tune, and press the SELECT button to confirm.
3.
The display will show the multiplex 5A to 13F.
4.
Press ▶" ^/▼ □ buttons to select the channel, and press the SELECT button to confirm.
5.
To listen to any stations found, return to the now playing screen and press ▶" ^/▼ □ buttons to
select the required station from the station list and press SELECT button to confirm.
DAB Display Modes
Every time you press the INFO button on the unit or remote control, the display will show the following
display modes:
DLS – Programme Type – Ensemble/Frequency – Signal Error/Strength – Bit Rate/Codec/Channels
– Date
DLS (Dynamic Label Segment)
This is a scrolling message giving real-time information, e.g. song titles, news headlines, etc.
Programme Type
This describes the "style" or "genre" of the programme that is being broadcast.

MAJORITY Fitzwilliam 3 Specifications

General

Brand	MAJORITY
Model	Fitzwilliam 3
Category	Radio
Language	English