GB-9
Before downloading software, ensure that the radio is plugged into a stable mains power
connection.
Interrupting the mains supply during software download can lead to functional
disturbances and/or damage to the unit!
If Timeout is set to "Off", the display brightness at standby will keep as operation mode
not able to adjust by DIMMER button on remote control.
Software Update
1.
During System Settings Mode, press ▶" ^/▼ □ buttons to select Software Update and then press the
SELECT button to confirm.
2.
Press ▶" ^/▼ □ buttons to select "Auto-check setting" or "Check now", and then press the SELECT
button to confirm.
Setup
Wizard
The setup wizard is available in the system settings section; you can run through this to configure settings
for date/time and network. Once this has finished, your radio is ready to use.
Info
1.
During System Settings Mode, press ▶" ^/▼ □ buttons to select Info and then press the SELECT
button to confirm.
2.
The software version, Spotify version, Radio ID and Friendly name will show on the display.
Privacy Policy
1.
To see the Privacy policy page, press MENU to go to System settings - Privacy Policy.
2.
After Factory reset, you need to accept the Privacy Policy again.
Backlight
1.
During System Settings Mode, press ▶" ^/▼ □ buttons to select Backlight and then press the SELECT
button to confirm.
2.
For the other settings under Backlight, press ▶" ^/▼ □ buttons to select the following options and
then press the SELECT button to confirm.
Operation Mode
High
/
Medium
/
Low
Standby Mode
Timeout: Off/ 10 sec/ 30 sec/ 60 sec
Standby Level: High/ Medium/ Low/ Off
Alternatively, pressing DIMMER button on remote control repeatedly can adjust the Backlight level under
ON mode and Standby mode.
To Next Page
Loading...
Need help?
General