EN
27
Signal Error/ Signal Strength
The signal error is indicated with a number. If the number is 0, it means the signal
received is error free and the signal strength is strong. If the error rate is high, it is
recommended to reposition the radio aerial or reposition the unit. The display will
show a slide bar to indicate the signal strength, the stronger the signal, the longer the
bar will be from left to right.
Bit Rate / Codec / Channels
The display will show the digital audio bit rate being received with additional
information about the audio codec and channel configuration.
Date
Displays the current date provided automatically by the broadcaster.
Prune Invalid
You may remove all unavailable stations from the list.
1. While in DAB Mode, press the MENU button and press 1 2 w s 3 buttons to
select Prune invalid. Press the SELECT button to confirm.
2. Press 7 / 8 buttons to select [YES], then press the SELECT button to confirm.
Or select [NO] to cancel.
DRC (Dynamic Range Compression)
If you are listening to music with high dynamic range in a noisy environment, you may
wish to compress the audio dynamic range.
1. While in DAB Mode, press the MENU button, then press 1 2 w s 3 buttons to
select DRC and press the SELECT button to confirm.
2. Press 1 2 w s 3 buttons to select DRC high/low/off then press the SELECT
button to confirm the setting.
DAB/DAB+ Radio Operation
To Next Page
Loading...
Need help?
General