MAJORITY Fitzwilliam 3 User Manual

EN
34
Sleep Setting
This function allows you to program the unit to switch to Standby Mode by itself after
a set period of time.
1. To activate the sleep function, press the SLEEP button on the remote control
repeatedly. The time will change in the below sequence on each button press:
Sleep OFF  15 minutes  30 minutes  45 minutes  60 minutes  90 minutes  120 minutes
2. When your desired sleep time appears in the display, stop pressing the button
and the sleep timer will be activated in two seconds. ‘ ' will show on the
display. Next to the sleep icon, you will also see the remaining time until the unit
will switch off displayed on the screen.
3. When the sleep timer counts down to zero, the unit will switch to Standby
Mode. To switch OFF the sleep function, while the sleep timer is still counting
down, press the SLEEP button repeatedly to select 'SLEEP OFF’.
Alternatively,
1. Press the MENU button on the remote control to access the main menu. Press
1 2 w s 3 buttons to select menu, and then press the SELECT button to enter.
2. Press 1 2 w s 3 buttons to select Sleep, and then press the SELECT button to
enter.
3. Press 1 2 w s 3 buttons to select sleep timer length as OFF, and then press
the SELECT button to confirm.
Sleep Setting

MAJORITY Fitzwilliam 3 Specifications

General

Brand	MAJORITY
Model	Fitzwilliam 3
Category	Radio
Language	English