MAJORITY Fitzwilliam 3 - Setting the Alarm

EN
35
Setting the Alarm
1. Press the ALARM button on the remote control, the display shows 'Alarm (1 or
2): Off [hh:mm]'.
2. Press 1 2 w s 3 buttons to select the Alarm number (1 or 2) then press the
SELECT button to start to enter.
Press 1 2 w s 3 buttons to select one of the following options then press the
SELECT button to confirm
3. Finally, select ‘SAVE', and then press the SELECT button to save the alarm
setting. The display will show
Alarm Saved. When the alarm is set, the alarm icon will appear on the display.
4. To temporarily switch off the alarm, press the SNOOZE button on the remote
control to activate the Snooze function when the alarm sounds. Press the
SNOOZE button on the remote control repeatedly to set snooze period time to
5, 10, 15 or 30 minutes in turn. The set snooze time will show on the display and
unit will go to standby.
5. To turn off the alarm when it sounds, press the VOLUME dial on the unit or
Power button on remote control, or the ALARM button on remote control.
Setting the Alarm
‘Enable’ Off/ Daily/ Once/ Weekends/ Weekdays
‘Time’ (Alarm On time)
‘Mode’ Buzzer/ Internet radio/ DAB/ FM
‘Preset’ Last Listened/ (Preset station)
‘Volume’ 0-32
‘Save’ Save and confirm the alarm setting