EN
36
Cancelling the Alarm
1. Press the ALARM button on the remote control, and the display will show 'Alarm
(1 or 2): On [hh:mm]'.
2. Press the 1 2 w s 3 buttons to select the Alarm number (1 or 2), and then
press SELECT button to start the setting of the timer.
3. Press the 1 2 w s 3 buttons to select 'Enable' and then press the SELECT
button to confirm.
4. Press the 1 2 w s 3 buttons to select 'Off' and then press the SELECT button
to confirm.
5. Finally, select 'Save' and then press the SELECT button to save the setting.
6. Alternatively, during Standby Mode, press the ALARM button on the remote
control repeatedly to turn the saved Alarm 1/2 on/off sequentially.
Cancelling the Alarm
To Next Page
Loading...
Need help?
General