EN
29
FM Operation
Press the MODE button on unit or remote control to access Mode Menu.
Rotate the SCROLL/SELECT dial on unit or press 7 / 8 buttons on the remote
control to select FM Radio mode. Press SCROLL/SELECT dial on the unit or the
SELECT button on the remote control to confirm.
The display will show the frequency.
Auto Scan
• Press the ‘SCAN / 1’ button on unit or ‘SCAN / 1 2 ’ button on remote control to
start searching for a station. Once a station has been found, the scanning will
stop automatically.
Alternatively,
• Press and hold for 2 seconds 1 2 w s 3 buttons to start searching for a station.
The automatic scan search may not stop at a station with a very weak signal.
Manual Tuning
To search for FM stations manually, turn the SCROLL/SELECT dial on unit or
press 1 2 w s 3 buttons on remote control repeatedly until your desired frequency is
reached.
With FM Radio, it maybe necessary to fine tune each station by rotating the
SCROLL/SELECT dial on unit or pressing 1 2 w s 3 buttons on the remote control
repeatedly. Each press will adjust the frequency by 0.05 MHz. If the signal reception is
still poor, adjust the position of the aerial or try moving the radio to another location.
FM Display Information
Press repeatedly the INFO button on the unit or remote control to scroll through the
info available. The display will show various info in each button press such as: Radio
Text – Programme Type – Frequency – Date.
RDS (Radio Data System) Radio Text
The display shows a scrolling message with information of current playing programme.
Programme Type
Describes the style or genre of music that is being broadcast.
FM Radio Operation
To Next Page
Loading...
Need help?
General