93USING THE CUSTOMIZER
CUSTOMIZING A THING CONTINUED
93
Create Thing: Click this button to begin
generating the STL file. [Fig. 13.4]
9. The Creating your Customized STL dialog
box will display a message telling you that
it is generating your file. Click the link Go to
my Queue to see the status of the new file.
10. When your file appears in the queue
with the status Done!, click the View
Thing button.
Unless you had Publish New Thing
checked, the Thing page will be private.
11. In the Thing page for your new file, click
the Download This Thing button.
12. In the Downloads dialog box, select the
appropriate file to download.
13. You can save the file to your local
computer or open the file with
MakerWare and print it.
To Next Page
Loading...
