THE CONTROL PANEL49
UTILITIES
Use the Utilities menu to access plate leveling, diagnostics and other tools.
Level Build Plate
Select to begin the assisted leveling process. For best results when leveling, make sure
filament is unloaded and the extruder nozzle is clean, and wipe any plastic debris o of the
build plate.
Camera
Select to access options related to your 3D printer’s built-in camera. In the camera menu, you can:
• • Take a photo of the build area using the built-in camera.
• • Browse photos taken by the built-in camera.
• • Copy photos to the USB drive.
• • Erase all photos taken with the built-in camera to date.
•
Park
Select to lower the build platform in order to access the build plate, filament waste bin
and camera.
Select the Preheat icon to preheat the Smart Extruderr. When you select Preheat, the Smart
Extruder will immediately start heating. The current and target temperatures will be visible
on the main screen.
PREHEAT
To Next Page
Loading...
