Manitou 180 ATJ 2 E3 RC - Page 63

2-17
CHARACTERISTICS OF 160 ATJ E3 - 160 ATJ E3 RC - 160 ATJS E3
DIMENSIONS
UNIT
160 ATJ E3 160 ATJS E3 160 ATJ E3 Wheel 18” TOL ±
Transport position
Width mm 2298 2320 2280 1%
Length mm 6530 6580 1%
Length (truck transport) mm 4440 4490 1%
Height mm 2370 2420 1%
Floor / ground height, during transport mm 370 420 1%
Turret overlap mm 232 180 242 1%
Work position
Working height mm 16010 16060 1%
Floor height mm 14010 14060 1%
Max offset, interior of basket mm 7795 1%
Working offset mm 8300 1%
Floor height, basket at max offset mm 7505 7555 1%
Overhang under upper arm mm 7380 7430 1%
Clearance under the chassis mm 355 405 2%
Clearance under the axle mm 260 275 310 2%
Max clearance angle under chassis % 75
78
2%
INT. / EXT. radius of gyration, two-wheel mm 2800 / 5600 2112 / 4990 2800 / 5600 3%
INT. / EXT. radius of gyration, four-wheel mm 1390 / 3710 3%
Basket
External volume mm 1800 x 800 1%
Floor area mm 1790 x 760 1%
CAPACITY
UNIT
160 ATJ E3 160 ATJS E3 160 ATJ E3 Wheel 18” TOL ±
Hydraulic oil reservoir l54 2
Diesel tank l52 2
Engine oil sump l 6.7 2
Coolant circuit l5 2
STANDARD EQUIPMENT
UNIT
160 ATJ E3 160 ATJS E3 160 ATJ E3 Wheel 18” TOL ±
Hour counter Standard -
230V pre-configuration Standard -
Diesel level proportional display Standard -
Low fuel level / battery alarm Standard -
Dead Man’s handle Standard -
Toolbox in the basket Standard -
User interface (diagnostic help) Standard -
Oscillating axle Standard -
OPTIONS
UNIT
160 ATJ E3 160 ATJS E3 160 ATJ E3 Wheel 18” TOL ±
Audible beep on all movements Option -
Rotating flashing light Option -
647414 EN (27/05/2015)