2-42
23 - LIFTING PLATFORM FORWARD / REVERSE AND RIGHT / LEFT MOVEMENT CONTROL
JOYSTICK
- Lever 23 enables you to move the lifting platform.
- You must press trigger A together with the Dead Man’s pedal (see 41) to perform
movements from the lifting platform’s control box.
- When the pedal or trigger A is released, no commands can be issued.
NB: This is a progressive control lever, which provides you with great accuracy in
approach. It must be manipulated flexibly, without jerking.
FORWARD TRANSLATION
- Push the lever forwards.
REAR TRANSLATION
- Pull the lever backwards.
STEER RIGHT
- Press button D.
STEER LEFT
- Press button G.
When the turret / arm structure is rotated more than 90° with respect
to the chassis
, there is a c
orrespondence between the direction of
translation shown by the arrows affixed to the chassis and those on
the basket control console (white and black arrows). Always refer to
the arrows shown on the machine’s chassis to know the direction of
movement.
24 - EMERGENCY STOP
- This switch enables you to cut off all the machine’s movements in the event of an
anomaly or danger arising.
- Press the knob to cut off all movements.
- Turn the knob a quarter turn to the right to deactivate it (the switch will automatically
return to its initial position).
In all cases, this control has priority; except when movements are
being made from the base con
trol station.
Do not use the emergency stop to simply shut down the nacelle,
otherwise, rearm it immediately as no action can be performed on
the control panel in the basket.
To obtain a return to the ground in spite of this engaged basket
emergency stop, use the emergency controls (see § Rescue
procedure).
676
23
D
G
A
41
24
647414 EN (27/05/2015)
To Next Page
Loading...
Need help?
General
