2-36
6 - INTERFACE SCREEN
- This screen lets you display all stages of start-up and parameters and access certain
menus such as:
• Maintenance display,
• Machine maintenance,
• Faults display,
• Faults history,
• Hour metres: internal-combustion engine meter, certain usage time sub-
meters, daily usage meter, function activation meter (manufacturer access
only).
- NOTE:
The current system time is displayed at the top of each page.
The serial number of the machine is displayed at the bottom of each page.
7 - INFORMATION VALIDATION SCREEN KEYS
- These keys enable you to validate the different information on the screens.
FUNCTIONS OF THE KEYBOARD KEYS:
7A : Selection keys for the proposals on the menu pages.
7B : Selection keys for the proposals on the sub-menu pages.
7C : This “Confirm / OK” key has two functions:
“Confirmation” key for the selections made by the plus / minus keys,
Fault acknowledgement key (the fault has been seen; this key enables you to get
rid of the screen without necessarily resolving the problem).
7D : This “Menu” key has two functions:
It enables you to open the “Access Menu” page.
Enter the code to get the desired menu (this code will be memorised for as long as
the lifting platform is receiving power).
It enables you to exit and return to the work screen page.
7E : The “Exit” key has two functions:
It cancels a validation in progress.
It enables you to return to the previous level in a menu.
7F : The “Fault” key displays any faults present on the lifting platform when the fault
triangle appears.
6
7
7A
7B
7C
7D
7E
7F
647414 EN (27/05/2015)
To Next Page
Loading...
Need help?
General
