EasyManuals Logo

Manitou 180 ATJ 2 E3 RC User Manual

Manitou 180 ATJ 2 E3 RC
160 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #75 background imageLoading...
Page #75 background image
2-29
SAFETY
TILT
When the lifting platform reaches the maximum authorised level of tilt (see the
CHARACTERISTICS section), LED 35* on the basket console flashes regularly. Also the
basket’s buzzer 42* sounds intermittently.
All the AGGRAVATING” movements of raising the arms and extending the telescope are
prohibited as a safety measure.
When recovering controls, only carry out de-aggravating
movemen
ts:
- return to the safety position by retracting the telescope and
lowering the arm, then reposition the access platform on more
horizontal ground.
FRONT BRIDGE OSCILLATION LOCKING FAULT
FROM THE PLATFORM No.951 458 AND THE PLATFORM No. 950 552
When the system detects a closing fault of the front bridge oscillation cylinders, the LED
35* on the control panel blinks rapidly and the warning buzzer is activated at a high
frequency.
All “DANGEROUS” arm lifting or telescopic movements are forbidden for safety reasons.
To regain control, only perform non-dangerous manoeuvres:
- return to a safe position b
y withdrawing the telescopic arm and
lowering the arms.
- To re-enable lifting movements once the nacelle is returned to the
“transport” position, cancel the fault by pressing OK” 7c*.
If the fault persists, contact your dealership.
OVERLOAD
When the lifting platform reaches the maximum authorised weight (see the
CHARACTERISTICS section), the Overload LED 34* on the basket console flashes
regularly. Also the basket’s buzzer 42* sounds constantly. All movements are prohibited
as a safety measure.
To resume control:
- Unburden the basket by r
emoving the object or objects causing the
overload,
OR
- Ask a person on the ground to perform a descent under manual control
(see paragraph “Rescue procedure in chapter 2 and “Safety stickers” in
chapter 1).
* : The above reference numbers also correspond to those used in the description of
these components on the follo
wing pages.
35
34
42
8
7c
647414 EN (27/05/2015)

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Manitou 180 ATJ 2 E3 RC and is the answer not in the manual?

Manitou 180 ATJ 2 E3 RC Specifications

General IconGeneral
BrandManitou
Model180 ATJ 2 E3 RC
CategoryBoom Lifts
LanguageEnglish

Related product manuals