2-44
28 - 29 STEERING MODE SELECTOR AND AXLE REALIGNMENTS
This contactor has three positions.
POSITION P1
- Select “Crab” mode.
POSITION P2
- Select 2-wheel drive mode.
POSITION P3
- Select 4-wheel drive mode. In this configuration, the only translation speeds are Slow
or Ramp.
29A FRONT WHEEL ALIGNMENT
- This indicator light illuminates when the front wheels are correctly aligned with the
machine’s axis.
29B REAR WHEEL ALIGNMENT
- This indicator light illuminates when the rear wheels are correctly aligned with the
machine’s axis.
P1
P2
P3
28
29A
29B
647414 EN (27/05/2015)
To Next Page
Loading...
