Manitou MARA PIGGYBACK User Manual

28
MARA PIGGYBACK SERVICE MANUAL
7
Install the sleeve over the
seals, being careful not to
pinch the back-up ring. Install
wire retaining ring in the
groove at the lower end of the
sleeve.
8
The MCU and negative spacers
will be installed on the damper
body at a later time. Grease
the air can ID and negative
seals with Slickoleum. Set
aside on a clean shop rag for
later use.
Air can service

Manitou MARA PIGGYBACK Specifications

General

Brand	Manitou
Model	MARA PIGGYBACK
Category	Bicycle Accessories
Language	English