D - ADJUSTABLE PROJECTING HOOK (OPTION)
D - ADJUSTABLE PROJECTING HOOK (OPTION)
COCOUPUPLINLINGG ANDAND UNUNCOCOUPLUPLININGG THETHE TRATRAILEILERR
-- To couple the trailerTo couple the trailer, position the lift truck as close as possible to the trailer ring., position the lift truck as close as possible to the trailer ring.
- Put the handbrake on and switch off the I.C. engine.- Put the handbrake on and switch off the I.C. engine.
ON THE FIXED PINON THE FIXED PIN
- Remove pin 1, remove rod 2 and raise latch 3.- Remove pin 1, remove rod 2 and raise latch 3.
- Insert or remove the trailer ring, lower latch 3 and refit rod 2.- Insert or remove the trailer ring, lower latch 3 and refit rod 2.
Be careful not to get Be careful not to get your fingers caught or crushed during this operation.your fingers caught or crushed during this operation.
Do not forget to put clip 1 back in place.Do not forget to put clip 1 back in place.
When uncoupling, make sure that the When uncoupling, make sure that the trailer is supported trailer is supported independentlyindependently..
ON THE COUPLING LADDERON THE COUPLING LADDER
- Set the coupling fitting 4 according to the height of the trailer ring.- Set the coupling fitting 4 according to the height of the trailer ring.
Do not forget to put rods and clip back in place.Do not forget to put rods and clip back in place.
- Remove the clip 5, lift the trailer pin 6 and place or remove the trailer ring.- Remove the clip 5, lift the trailer pin 6 and place or remove the trailer ring.
Be careful not to get Be careful not to get your fingers caught or crushed during this operation.your fingers caught or crushed during this operation.
Do not forget to put clip 5 back in place.Do not forget to put clip 5 back in place.
When uncoupling, make sure that the When uncoupling, make sure that the trailer is supported trailer is supported independentlyindependently..
E - HYDRAULIC TRAILER HOOK (OPTION)E - HYDRAULIC TRAILER HOOK (OPTION)
NOTE:NOTE: The rear-view mirror OPTION is mandatory with the hydrThe rear-view mirror OPTION is mandatory with the hydraulic trailer tow hook.aulic trailer tow hook.
-- Raise the hydraulic tow hook to release the hook lock 1 by pulling the lever on distributorRaise the hydraulic tow hook to release the hook lock 1 by pulling the lever on distributor
2 backwards.2 backwards.
-- Pull the knob 3, retain this position and Pull the knob 3, retain this position and push lever 2 forwards to lower the tow hook.push lever 2 forwards to lower the tow hook.
- Release knob 3.- Release knob 3.
- Couple or uncouple the trailer.- Couple or uncouple the trailer.
When uncoupling, make sure that When uncoupling, make sure that the trailer is the trailer is supported independentlysupported independently..
-- Raise the trailer hook by pulling the lever on distributor 2 backwards anRaise the trailer hook by pulling the lever on distributor 2 backwards and then lower thed then lower the
hook to verify that the lock pin is in proper contact with hook 1 lock.hook to verify that the lock pin is in proper contact with hook 1 lock.
Never use the tow hook to Never use the tow hook to raise the rear of the lift raise the rear of the lift truck (when changing the rear wheel for example).truck (when changing the rear wheel for example).
F - CONNECTING THE BRAKE F - CONNECTING THE BRAKE SYSTEM (OPTION)SYSTEM (OPTION)
- Connect the brake hose to the provided brake unit 1 on the lift truck.- Connect the brake hose to the provided brake unit 1 on the lift truck.
-- Make sure the trailer brakes are working properly and teMake sure the trailer brakes are working properly and test the effects of braking beforest the effects of braking before
taking the trailer onto the taking the trailer onto the public highway.public highway.
11
To Next Page
Loading...
Need help?
General