DESCRIPTION AND USE OF THE OPTIONS
DESCRIPTION AND USE OF THE OPTIONS
1 - BATTERY CUT-OFF1 - BATTERY CUT-OFF
2 - REVERSE BUZZER ALARM2 - REVERSE BUZZER ALARM
3 - NUMBER PLATE3 - NUMBER PLATE
4 - NUMBER PLATE LIGHTING4 - NUMBER PLATE LIGHTING
5 - PREHEATING ELEMENT5 - PREHEATING ELEMENT
Enables the engine to be kept warm during prolonged periods of stoppage and thusEnables the engine to be kept warm during prolonged periods of stoppage and thus
improves engine starting.improves engine starting.
Supply characteristics of preheating system:Supply characteristics of preheating system:
• Rated range of power: 220-240V; • Rated range of power: 220-240V; 50-60Hz50-60Hz
• Current consumed: 4,5A• Current consumed: 4,5A
• Equipment in class 1• Equipment in class 1
• Equipment connectable only on feeder circuit TT or TN• Equipment connectable only on feeder circuit TT or TN
• Category of insulation 2• Category of insulation 2
Environmental conditions for use:Environmental conditions for use:
• Maximum ambient temperature for using preheating: +25° C• Maximum ambient temperature for using preheating: +25° C
• Pollution level 2• Pollution level 2
Conditions for connection and use of preheating:Conditions for connection and use of preheating:
- The preheating system should - The preheating system should not be used for an extnot be used for an external ambient temperature higher than +ernal ambient temperature higher than + 25° C.25° C.
- It is essential that the - It is essential that the power supply to the preheating system is:power supply to the preheating system is:
•• Effected with a cable that conforms to the installation standards in fEffected with a cable that conforms to the installation standards in force and contains a protective earth conductor.orce and contains a protective earth conductor.
• Contains an appropriate sectioning system.• Contains an appropriate sectioning system.
•• Incorporates an appIncorporates an appropriate safety system ropriate safety system against short circuits (fuses or circuit breaker) and against short circuits (fuses or circuit breaker) and a differential circuit breakera differential circuit breaker
with 30mA sensitivity.with 30mA sensitivity.
-- Only connect to and disconnecOnly connect to and disconnect from the power supply while the t from the power supply while the unit is off and the I.C. engine is stopped.unit is off and the I.C. engine is stopped.
11
55
33
44
44