6 - MODCOD ANTI-THEFT SYSTEM
6 - MODCOD ANTI-THEFT SYSTEM
OPERATIONOPERATION
- Switch on the lift truck: the red indicator 1 will flash.- Switch on the lift truck: the red indicator 1 will flash.
- Enter your user code followed by “V” to validate: the green indicator 2 will come on.- Enter your user code followed by “V” to validate: the green indicator 2 will come on.
-- Start the lift truck within the next Start the lift truck within the next 60 seconds; 60 seconds; otherotherwise the anti-thefwise the anti-theft system will t system will bebe
reactivated and the red indicator will flash.reactivated and the red indicator will flash.
NOTE:NOTE:
-- If you make a mistake when enIf you make a mistake when entering the code, press key “A” tering the code, press key “A” to cancel and re-enter theto cancel and re-enter the
code in full.code in full.
-- If you wait more than 5 seconds If you wait more than 5 seconds between key presses or do between key presses or do not complete entering thenot complete entering the
code, the anti-theft system will be reactivated and the red indicator will flash.code, the anti-theft system will be reactivated and the red indicator will flash.
7 - FINTRONIC ANTI-START SYSTEM7 - FINTRONIC ANTI-START SYSTEM
OPERATIONOPERATION
-- Switch on the lift truck and set the black key A next to the antenSwitch on the lift truck and set the black key A next to the antenna B (maximum 80 mm).na B (maximum 80 mm).
-- Wait a few seWait a few seconds for red LED C to go conds for red LED C to go out before starting the lift truck.out before starting the lift truck.
NOTE:NOTE: YYou can restart the lift trou can restart the lift truck within 20 seconds of stopping it: aftuck within 20 seconds of stopping it: after this time, theer this time, the
anti-start system reacts and LED C flashes red.anti-start system reacts and LED C flashes red.
8 - CLEANFIX SELF-CLEANING FAN8 - CLEANFIX SELF-CLEANING FAN
This system, operated by switch 1, cleans the radiator core and the grille of the engineThis system, operated by switch 1, cleans the radiator core and the grille of the engine
cover by reversing the air flow.cover by reversing the air flow.
When in use, beware of the risk of When in use, beware of the risk of projection into the eyes.projection into the eyes.
Position A: Position A: The indicator light is on, the fan operates in The indicator light is on, the fan operates in self-cleaning mode for a fewself-cleaning mode for a few
seconds once every 3 minutes.seconds once every 3 minutes.
Position B: The indicator light is off, the fan is in normal operating mode.Position B: The indicator light is off, the fan is in normal operating mode.
AA
BB
CC
22
11
AA
BB
11
To Next Page
Loading...
Need help?
General