Manitowoc 31000

Reference Only
SET-UP AND INSTALLATION 31000 LUFFING JIB OPERATOR MANUAL
4-36 Published 07-23-15, Control # 078-03
37
Using an assist crane (E) and Drum 1 or Drum 2 wire rope (F), attach the strut cap (D) to the main strut transition
insert (C):
• Position the strut cap (D) so that the top two strut cap pins (A) engage the main strut transition insert (J) hook
connector (B).
• Slowly swing the strut cap (D) down until it is possible to fasten the bottom two strut cap pins (A).
Step Action
FIGURE 4-37
Item Description
A Strut cap pin.
B Hook connector.
C Main strut transition insert.
D Strut cap.
E Assist crane.
F Drum 1 or Drum 2 wire rope.
B
C
A (top)
A (bottom)
C
C
D
E
E
E
F
F
F
D
D