Part Number 80-1505-3 6/11 43
CVD® CONDENSING UNIT
Each condensing unit ships from the factory
pressurized with 50/50 nitrogen helium mixture that
must be removed during the installation process
(approximately 20 psig).
REFRIGERATION LINE SETS/TRAP KIT
Refrigeration Rated Tubing and Trap Kits are shipped
capped with atmospheric pressure.
Potential Personal Injury Situation
The ice machine head section contains the
refrigerant charge. Installation and brazing of the line
sets must be performed by a properly trained and
EPA certified refrigeration technician aware of the
dangers of dealing with refrigerant charged
equipment.
Installation of a QuietQube® Condensing Unit may
require the use of special equipment for placement.
Trained and qualified personnel are required for
proper rigging and lifting.
To Next Page
Loading...
