96 Part Number 80-1505-3 6/11
E. Remove ice dampers.
• Grasp ice damper and apply pressure toward the
back mounting bracket.
• Apply pressure to the front mounting bracket with
thumb.
• Pull ice damper downward when the front ice
damper pin disengages.
F. Remove the water pump assembly.
• Disconnect the vinyl distribution tube from the
water pump.
• Disconnect the water pump and water level probe
electrical connections.
• After the wires are disconnected squeeze the two
tabs and lift the water pump assembly out of the
ice machine.
• Do not immerse the water pump motor in cleaner
or sanitizer solutions.
G. Remove the water trough.
• Depress the two tabs on the top of the water
trough.
• Turn left and right ice dampers down to clear water
trough.
• Pull forward on the water trough to remove.
NOTE: Proceed to page 101, Step 7.
To Next Page
Loading...
