10
Tool Box
Check if the following tools are complete. If anything described is missing, please
contact:
support@mankati.com.
1) 1*diagonal pliers: to dismantle the support underneath your printing model or
to prune filament.
2) 4* Spanners: installation tools.
3) 1* Glove pairs: as gift for the user.
4) 1* Lubricant oil: to lubricate XY axis and guide rails regularly.
5) 1* Kapton tape: sticked on the build plate to fix your printing model on it.
6) 1* Scraper: to shovel out the model and clean the build plate.
7) 1* Screwdriver: the installation tool.
8) 1*Art knife: to improve the surface texture of your model printed out.
9) 1* Tweezer: to clean filament extruded out by the nozzle.
10) 2*Filament holders: holding filament spools.
11) 2*Printer handles: installed on your machine for moving it easily.
12) 3* Inner hexagonal spanner ( L-shape wrench): installation tools.
13) 1* Drill: to clean the nozzle.
14) 1* Plastic scraper: to clean the heat bed after printing.
15) 1*SD card to store Gcode file for printing.
16) 2* Screw & Nut bags: as spare parts.
17) 1*Power wire: supplying power.
18) 1*USB cable: connecting the computer and your printer when printing or
upgrading firmware.
To Next Page
Loading...