Mankati FULLSCALE XT PLUS - How It Works

www.mankati.com
4
How it Works
The Mankati Fullscale XT Plus 3D Printer makes solid, three-dimensional objects out of melted Filament. Your 3D designed files are
read from SD card and translated into instructions by Mankati Fullscale XT Plus. The machine then heats the filament and through a
nozzle squeezes it out onto heat bed to build a solid object, layer by layer. This method is called Fused Deposition Modeling [FDM].
Preparing the model
Use a 3D modeling software
to output stl or obj format 3D
modelle.
MankatiUM
MankatiUM is a software to
preparethegcodeleforyour
FullscaleXTPlus.
In MankatiUM, you can set
printing parameters for your
model, such as layer thickness,
printing speed and nozzle
temperature, then output a
gcodeleforprinting.
Transfer the GCode file
SavetheGCodeleintotheSD
card, and insert it into the SD
cardreaderoftheprinter.
Prepare the printer
Before 3D printing, you need to
loadthelamentfortheprinter.
Print it!
Operate the knob beside the LCD
and choose the model from the
SDcardinsertedintotheprinter.