Mankati FULLSCALE XT PLUS - LCD Menu

www.mankati.com
17
LCD Menu
Info Screen
1. Actual Temperature of Nozzle 1;
2. Preset Temperature of Nozzle 1;
3. Actual Temperature of Nozzle 2;
4. Preset Temperature of Nozzle 2;
5. Actual Temperature of Build Plate;
6. Preset Temperature of Build Plate;
7. Cooling Fan;
8. Fan Speed Rate;
9. Filament Feed Rate;
10. Printing Process Bar;
11. Printing Time;
12. Build Plate Coordinate;
1
9 10 11 12
2 3 4 5 6 7 8
Press the knob to enter the menu:
1 - Prepare: The printer enters into ready state
1.1 - Auto home
Theprinterreturnstooriginalstate(InX.Ydirection,theextruderreturnstotheleftbottomintop
view; In Z direction, the build plate returns to top position)
1.3 - Move axis:
Move 10mm: Move 10mm each step
Move X: Move 10mm each step in X direction
Move Y: Move 10mm each step in Y direction
Move 1mm: Move 1mm each step
Move X: The extruder will move 10mm each step in X direction
Move Y: The extruder will move 10mm each step in Y direction
Move Z: The build plate will move 10mm each step in Y direction
Extruder: Thefeedingmotorofleftnozzlewillextrudethelamentineachstepof1mm
Extruder2: Thefeedingmotorofrightnozzlewillextrudethelamentineachstepof1mm
Move 0.1mm: Move 0.1mm each step
Move X: Theextruderwillmove0.1mmeachstepinXdirection
Move Y: Theextruderwillmove0.1mmeachstepinYdirection
Move Z: Thebuildplatewillmove0.1mmeachstepinYdirection
Extruder: Thefeedingmotorofleftnozzlewillextrudethelamentineachstepof0.1mm
Extruder2: Thefeedingmotorofrightnozzlewillextrudethelamentineachstepof0.1mm
1.4 - Preheat PLA:
Preheat PLA1: PreheatextruderandbuildplatetotheworkingtemperatureofPLArequired(
Default:Extruder,210
℃,
Build plate, 45
℃）
Preheat PLA2: Preheat extruder 2 and Build plate to the working temperature of PLA
required(Default:Extruder,210
℃；
Build plate, 45
℃）
Preheat PLA All: Preheat two extruders both and build plate to the working temperature of
PLArequired(Default:Extruder,210
℃；
Build plate, 45
℃）
Preheat PLA Bed: PreheatbuildplatetotheworkingtemperatureofPLArequired(Default:
Build plate, 45
℃）
1.5 - Preheat ABS:
Preheat ABS1: PreheatextruderandbuildplatetotheworkingtemperatureofABSrequired(
Default:Extruder,235
℃；
build plate, 70
℃）
Preheat ABS2: Preheat extruder 2 and build plate to the working temperature of ABS
required(Default:Extruder,235
℃；
Build plate, 70
℃）
Preheat ABS All: Preheat two extruders both and build plate to the working temperature of