Mankati FULLSCALE XT PLUS - LCD Menu Structure

1 - Prepare
1.1 - Auto Home
1.2 - Disable Steppers
1.3 - Move Axis
1.3.1 - Move 10mm
1.3.1.1 - Move X
1.3.1.2 - Move Y
1.3.2 - Move 1mm
1.3.2.1 - Move X
1.3.2.2 - Move Y
1.3.2.3 - Move Z
1.3.2.4 - Extruder
1.3.2.5 - Extruder 2
1.3.3 - Move 0.1mm
1.3.3.1 - Move X
1.3.3.2 - Move Y
1.3.3.3 - Move Z
1.3.3.4 - Extruder
1.3.3.5 - Extruder 2
1.4 - Preheat PLA
1.4.1 - Preheat PLA 1
1.4.2 - Preheat PLA 2
1.4.3 - Preheat ALL
1.4.4 - Preheat PLA Bed
1.5 - Preheat ABS
1.5.1 - Preheat ABS 1
1.5.2 - Preheat ABS 2
1.5.3 - Preheat ALL
1.5.4 - Preheat ABS Bed
1.6 - Leveling Bed
1.7 - Cool Down
2 - Control
2.1 - Temperature
2.1.1 - Nozzle
2.1.2 - Nozzle 2
2.1.3 - Bed
2.1.4 - Fan Speed
2.1.5 - Auto Temp
2.2 - Motion
2.3 - Restore Failsafe
2.4 - Save Memory
2.5 - Restore Factory
2.6 - Firmware Version
3 - Cool Down
4 - No SD Card
Info Screen
www.mankati.com
16
LCD Menu Structure