Initializing CD Player
CD Player initialization should be performed when the μcom, peripheral parts of μcom, and CD PCB were replaced.
1. Turn off the power pressing Power operation button.
2. Turn on the AC plug while simultaneously while pressing
"
3
"
and
"DISC/INPUT"
buttons.
3.
"INITIALIZING"
is displayed on the FL tube.
Note: • All user settings will be lost and this factory setting will be recovered when this initialization mode. So
make sure to memorize your setting for restoring after the initialization.
POWER PAUSEDISC/INPUT
CAUTION IN SERVICING
10
To Next Page
Loading...
