Marantz HD-DAC1 - TECHNICAL SPECIFICATIONS; Audio and Headphone Output Specs; Digital Input and General Specs

n
Analog output
Channels:
2-channels
Playable frequency range:
2 Hz - 96 kHz
Playable frequency response:
2 Hz - 50 kHz (-3 dB)
(DSD mode, PCM sampling frequency: 192 kHz)
2 Hz - 20 kHz
(PCM sampling frequency: 44.1 kHz)
S/N:
110 dB (Audible range)
Dynamic range:
106 dB (DSD/192 kHz) (Audible range)
101 dB (44.1 kHz)
Harmonic distortion:
0.0012 % (1 kHz, Audible range)
Unbalanced output
• Fixed:
2.3 V RMS (PCM)
1.7 V RMS (DSD)
• Variable:
2.3 V RMS (PCM) (Volume max./Gain: Low)
1.7 V RMS (DSD) (Volume max./Gain: Low)
Headphone output:
800 mW/32 Ω/ohms (Volume max.)
• Analog input
Input sensitivity/impedance:
200 mVrms/22 kΩ/kohms
Digital input
Coaxial:
0.5 Vp-p / 75 Ω/ohms
Optical :
-27 dBm or lator
USB (Front):
USB Type A (USB 2.0 Full speed)
USB (Rear):
USB Type B (USB 2.0 High speed)
n
General
Power supply voltage/frequency:
AC230 V, 50/60 Hz(N), AC100V, 50/60Hz(F), AC120V,60Hz(U)
Power consumption (EN60065) :
35 W
Power consumption in standby mode:
0.3 W
TECHNICAL SPECIFICATIONS
9