DISASSEMBLY
• Remove each part in the order of the arrows below.
• Reassemble removed parts in the reverse order.
• Read "Precautions During Work" before reassembling removed parts.
• If wire bundles are removed or moved during adjustment or part replacement, reshape the wires after completing the
work. Failure to shape the wires correctly may cause problems such as noise.
FRONT PANEL ASSY
See
"DISASSEMBLY
3. FRONT PANEL ASSY
and
"EXPLODED VIEW"
FRONT PCB
(Ref. No. of EXPLODED VIEW : C1)
VOLUME PCB
(Ref. No. of EXPLODED VIEW : C1-1)
HEADPHONE PCB
(Ref. No. of EXPLODED VIEW : C1-2)
USB-A PCB
(Ref. No. of EXPLODED VIEW : C1-3)
TRANS POWER
See
"DISASSEMBLY
7. TRANS POWER
and
"EXPLODED VIEW"
MAIN TRANS
(Ref. No. of EXPLODED VIEW : C4)
AUDIO POWER AMP ASSY
See
"EXPLODED VIEW"
AUDIO POWER AMP PCB
(Ref. No. of EXPLODED VIEW : C3-2)
CLAMP PCB
(Ref. No. of EXPLODED VIEW : nothig)
DIGITAL PCB
See
"DISASSEMBLY
4. DIGITAL PCB
and
"EXPLODED VIEW"
DIGITAL
PCB
(Ref. No. of EXPLODED VIEW : C2)
MAIN POWER PART PCB
See
"DISASSEMBLY
6. MAIN POWER PART PCB
and
"EXPLODED VIEW"
MAIN POWER PART PCB
(Ref. No. of EXPLODED VIEW : C3)
SIDE PANEL
See
"DISASSEMBLY
1. SIDE PANEL
and
"EXPLODED VIEW"
(Ref. No. of EXPLODED VIEW : P8/P9)
SUB TRANS PCB
See
"DISASSEMBLY
5. SIDE PANEL
and
"EXPLODED VIEW"
SUB TRANS PCB
(Ref. No. of EXPLODED VIEW : C3-1)
TOP COVER
See
"DISASSEMBLY
2. TOP COVER
and
"EXPLODED VIEW"
TOP COVER
(Ref. No. of EXPLODED VIEW : M6)
12
To Next Page
Loading...
